Programming My Vex IQ

Moving Forward: This was the first challenge where you had to make the robot stop at the line, pause for a second, then go to the next line.

Turning: You had to maneuver the robot around the lines ne not touch the lines.

Touch Sensor: The robot had to hit the block with its bumper sensor, back up, then pick up the block.

Distance Sensor: The robot had to sense the walls with it's distance sensor and get to the end without bumping into anything.

Gyro Illinois: The robot had to sense the lines and turn the right amount with its Gyro Sensor.

Color Sensor: The robot had to sense the color of the block. If it saw a red block, it would stop. If it saw a green block, it would go.

Loops: The robot had to use its distance sensor to detect a block, grab it, then bring it back to the starting point. It did this 4 times.

If/Else: If the robot sensed a green block, it would bring it to the "not strawberries" side. If it sensed a red block, it would bring it to the "strawberries" side.

Repeated Decisions: This Challenge was on the sma course as the turning Challenge. The only difference was that the robot would stop when it sensed a block, and go when the block was taken away. The distance sensor was used.

Report Abuse

If you feel that this video content violates the Adobe Terms of Use, you may report this content by filling out this quick form.

To report a Copyright Violation, please follow Section 17 in the Terms of Use.