problem statement- My goal is to build this go kart contraption that is power by a drill. i will be in control of the gas pedal and the braking system.I also will designing the base and how it stays together. Lucas is in charge of the seat and how it moves. jaquai will be in designing the steering system. Jamere will in charge of the wheels and how they left to right.we will be observed by three different objectives. we will be working on this from now 2/10/17 until 6/6/17. we have a group budget that is a maximum of 25$, with this money we might purchase dull rodes, wheels and etc. the materials that we will be giving are 18v drill, 1 sheet of 3/4 plywood, miscellaneous hardware, and wood glue. we have materials that we are going to need like wheels and the dull rodes as i said before.
this is the front view of the go kart. you can see the whole kart. the steering wheel, the wheels, the brake pedal and the gas pedal, the base and the steering system. https://www.youtube.com/watch?v=Xk5KfLwXGnk
This is what it will look like. i picked this picture because it is a side view of what we will be constructing.there are the wheels, the seat, and the brake pedal.
this is the back top view of the sketch. in this image we have the braking and gas pedals. the seating, the steering and the base of it.
this is the side view we have the 4 wheels and the steering also the seat.
This system prevents us from falling off the 2 by 4
The front will put the bottom of this wooden rectangle. This also is the same image of the back wheels.
This image is all of our parts put together and assembled. in the front and the back is our wheels. in the middle is our seat. in front of the seat is the brake and the gas pedal. in the middle of the seat and the pedals is the steering wheel.
This is the steering wheel. we will connecting it to the base so that we can move the wheels.
This is the process we went through to get it almost completely finish.