Apple Baby Change Table Recessed Wall Installation

Tools

  • drywall saw
  • utility knife
  • aviation snips
  • drill/impact gun
  • grinder
  • level
  • caulking gun

Materials

  • baby change table #9018
  • drywall screws 1 1/4'' x 1 5/8''
  • steel studs
  • metal cutting disc(s)

Setting Up

  1. Ensure area is safe and well protected from dust and debris.
  2. Ensure all tools and materials are on hand and ready for use.
  3. Double check installation location and guidelines provided are followed correctly.
  4. Ensure proper attire (Freshco attire, safety equipment including safety boots, Freshco clothing, safety glasses, gloves, etc.) are worn before beginning construction.
  5. Review all drawings and guidelines prior to construction.
  6. THE IMPORTANCE OF PICTURES CANNOT BE STRESSED ENOUGH.

Step 1: Lay out position of installation

  • TAKE A PHOTO OF BLANK WALL LOCATION
  • determine correct location of installation by referencing store drawings
  • create rough opening directions
  • check for any obstructions that could cause issues (water, electrical lines, etc.)
  • check opposite side of the wall for any obstructions
TAKE PHOTO ONCE STEP 1 IS COMPLETE

Step 2: Begin rough opening

  • cut along lines drawn into drywall
  • remove drywall
  • check for wires/obstructions before continuing
  • cut and remove studes revealed in opening
TAKE PHOTO AFTER STEP 2 IS COMPLETE

Step 3: Prepare studs/blocking

  • cut two metal studs 50'' length (adjust accordingly if necessary)
  • cut two 2x3 wood studs 50'' in length (adjust accordingly if necessary)
  • secure wood studs inside metal studs with drywall screws
TAKE PHOTO AFTER STEP 3 IS COMPLETE

Step 4: Install blocking

  • position stud along vertical edge of rough opening
  • secure blocks with drywall screws. To avoid unecessary patchwork, ensure screws are not exposed beyond the trim kit
  • repeat for both sides
TAKE PHOTO AFTER STEP 4 IS COMPLETE

Step 5: Install baby change table

  • insert baby change unit into rough opening
  • check for level
  • secure with provided hardware (lag screw/washer, etc.)
TAKE PHOTO AFTER STEP 5 IS COMPLETE

Made with Adobe Slate

Make your words and images move.

Get Slate

Report Abuse

If you feel that this video content violates the Adobe Terms of Use, you may report this content by filling out this quick form.

To report a Copyright Violation, please follow Section 17 in the Terms of Use.