Sorbents vs. Clay Spilfyter® meltblown sorbents are the far superior choice for spill clean-up, worker safety and cost savings.

REGULATIONS DRIVE EVERYTHING...

...ARE YOU IN COMPLIANCE?

  • 29 CFR 1910.120(J)(1)(viii) where major spills may occur, a spill containment program, which is part of the employer’s safety and health program required in paragraph (b) of this section, shall be implemented to contain and isolate the entire volume of the hazardous substance being Transferred.
  • 29 CFR 1910.22(A)(2) floors in your workplace should be “...Maintained in a clean and, so far as possible, a dry condition.”
  • 40 CFR 112.7(C)(1)(iv) booms and other barriers are considered an “...Appropriate containment and/or diversionary structures or equipment to Prevent a discharge.”
  • 40 CFR 263.30(A) in the event of a spill, transporters must “...Take appropriate immediate action to protect human health and the environment.”
  • 29 CFR 1910.107(G)(2) OSHA requires all spraying areas to be “...Kept as free from the accumulation of deposits of combustible residues as Practical.”
  • OSHA 1910.120(Q)(3)(ii) the individual in charge of the ICS (incident control system) shall identify, to the extent possible, all hazardous substances or conditions present and shall address as appropriate site analysis, use of engineering controls, maximum exposure limits, hazardous substance handling procedures, and use of any new technologies.
  • 1910.1048(J)(3) “the employer shall assure that all leaks are repaired and spills are cleaned promptly by employees wearing suitable protective equipment and trained in proper methods for cleanup and decontamination.”

don't worry...we're here to help you comply!

Still using clay...?

you might be throwing money away!
Used clay granules become spread out after use, requiring more man-power to sweep up, collect and dispose of accordingly.
Clay granules often require a broom, dustpan or even a shovel to clean up after use.

CLAY COSTS YOU MONEY!

it's about keeping your workplace clean and safe

Universal Sorbents are used to absorb liquids that are water or oil based.
Oil-Only Sorbents are used to absorb liquids that only oil based.
Hazmat Sorbents are used to absorb aggressive chemical liquids.

Case study in use:

Sorbents Vs. Clay

the bottom line...

TOTAL SAVINGS: $225,008!!!

CLICK ON THE LINKS BELOW TO LEARN MORE ABOUT WHAT SPILFYTER CAN DO FOR YOU!

Report Abuse

If you feel that this video content violates the Adobe Terms of Use, you may report this content by filling out this quick form.

To report a Copyright Violation, please follow Section 17 in the Terms of Use.